Email : zhou@sinobiochemistry.com Phone : +86-13941198570
Views: 0 Author: Site Editor Publish Time: 2025-07-09 Origin: Site
Trimercaptotriazine sodium salt is a great choice for removing heavy metals in factories. TMT-55 and TMT-15 are its main types. They work by making strong bonds with metals like mercury, lead, and copper. Many businesses use this compound to clean wastewater and control air pollution. These bonds help remove metals safely and well. This makes trimercaptotriazine sodium salt a popular pick. Dalian Sinobio Chemistry Co.,Ltd. sells this product. They also offer other water treatment and biocide chemical solutions.
Trimercaptotriazine sodium salt (TMT) sticks tightly to heavy metals like mercury, lead, and copper. This makes it simple to take these metals out of water.TMT is used in many places like factories, power plants, electronics, and mining. It helps clean dirty water and cuts down on pollution.The chemical makes strong solids with metals that fall out fast. This helps factories follow tough environmental rules in a safe and easy way.Using TMT saves money because it needs fewer chemicals. It also lowers the cost for handling sludge and safety steps.TMT is safer and works better than old chemicals. This makes it a popular choice for protecting nature and keeping water safe.
Trimercaptotriazine sodium salt helps take out heavy metals from factory water. TMT-55 is a sodium salt of trithiocyanuric acid. It has three hydrosulfide groups. These groups are strong ligands that grab onto metal ions. When TMT-55 goes into water, the hydrosulfide groups stick to soft heavy metals. This makes stable metal-thiolate complexes. These complexes come out of the water as solids. This makes it simple to remove metals from the liquid.
Scientists have studied how these complexes are made and what they look like. They found that TMT-55’s ligand structure helps make metal complexes easily. Tests show these complexes are stable and work well. The way TMT-55 is made lets every ligand site bind to metals. This helps remove more metals. Because of this, trimercaptotriazine sodium salt is a good choice for factories that need to get rid of heavy metals.
Note: Making and checking TMT-55 complexes is very important. Good synthesis keeps the ligand structure strong. This is needed for strong metal binding.
Trimercaptotriazine sodium salt can pick certain metal ions better than other chemicals. TMT-55 is very good at grabbing mercury ions. Its ligand structure goes after mercury and makes strong complexes. This means TMT-55 can take out mercury even if other metals are there.
The table below shows how much TMT-55 holds onto different metal ions at pH 2.0:
Metal Ion | Retention by TMT-55 at pH 2.0 (%) |
|---|---|
Hg(II) | 100 (completely retained) |
Ca(II) | 0 (not retained) |
Co(II) | 0 (not retained) |
Cd(II) | 0 (not retained) |
Ni(II) | 0.74 |
Cu(II) | 0.97 |
Zn(II) | 3.5 |
Pb(II) | Very low (exact % not specified) |
Fe(III) | 6.3 |
This table shows TMT-55 holds onto mercury ions very well. It does not hold onto metals like calcium, cobalt, or cadmium. This happens because the ligand structure is made to like mercury more than other ions.
TMT-55 works better than other chemicals like potassium or sodium thiocarbonate. Many old chemicals make weaker complexes and are not as safe. The way TMT-55 is made and checked helps factories trust it for removing heavy metals.
Dalian Sinobio Chemistry Co.,Ltd. sells trimercaptotriazine sodium salt and other water treatment and biocide chemicals. Their skill in making and checking these products helps factories meet environmental rules. The ligand-based method of TMT-55 and new ways of making it make it a top pick for heavy metal removal.
Factories and city plants must follow strict water rules. Many places, like plating shops and electronics makers, have water with lots of metal ions. TMT-55 and TMT-15 help solve this problem. Workers add these to the water. They react with the metal ions in the water. The hydrosulfide groups in TMT-55 grab metals like mercury, copper, and lead. These groups make strong bonds with the metals. The metals turn into solids and settle out. This makes it easy to take out the metals.
Coal power plants and PCB factories use TMT-55 to remove heavy metals. This helps them follow the law and avoid getting fined. Dalian Sinobio Chemistry Co.,Ltd. sells TMT-55 and TMT-15 for these jobs. Their products work well and give good results. Many people also buy other water treatment and biocide chemicals. These help make a full treatment system.
Tip: Using TMT-55 in water treatment can lower metal pollution. It also helps keep local water safe.
Power plants and waste burners make flue gas with harmful metals. Mercury is a big worry because it can get into the air. TMT-55 is used in flue gas desulfurization systems. When added to FGD gypsum, TMT-55 grabs mercury ions. These bonds stop mercury from going back into the air or water.
Tests show TMT-55 can cut mercury in leachate to about 10% of what it was. The amount of mercury released drops by more than two-thirds. Using more TMT-55 and raising the pH helps keep mercury stable. This helps power plants and burners meet air quality rules. Sodium dithiocarbamate sometimes works better, but TMT-55 is still trusted for mercury control.
Dalian Sinobio Chemistry Co.,Ltd. gives TMT-55 for flue gas cleaning. Their know-how helps people use these chemicals safely and well.
Electronics factories and mines make water with many metal ions. PCB making uses metals like copper and lead. Mining sites often have water with heavy metals. TMT-55 and TMT-15 help by making strong bonds with these metals. These bonds make it easy to take metals out of water and help the environment.
In electronics, TMT-55 helps remove copper and lead from rinse water. Mining companies use TMT-15 to treat water with mercury and other metals. The metals turn into solids and do not go back into nature. Dalian Sinobio Chemistry Co.,Ltd. sells both TMT-55 and TMT-15. They also offer other water treatment chemicals for these jobs.
Note: Picking the right TMT depends on which metals are in the water and what you want to do. Both TMT-55 and TMT-15 work well for taking out heavy metals.
Operators begin by making a solution with trimercaptotriazine sodium salt. They measure the right amount of TMT-55 or TMT-15. The amount depends on how much metal is in the water. The solution must be mixed well so it spreads evenly. Sometimes, metal ions need to be changed to a certain state. For example, TMT only removes Cu(II) ions, not Cu(I). If needed, workers change the ions before adding TMT. It is important to test reactor materials first. TMT and its complexes can cause corrosion. Glass or metal reactors should be checked before use.
After getting ready, operators add the TMT solution to the water. The hydrosulfide groups in TMT react with metal ions. This makes stable complexes that do not dissolve. These complexes settle out of the water as solids. The process works best when the pH is controlled. Operators watch the reaction to make sure all metal ions are removed. The process does not work for trivalent ions like Al(III), Cr(III), or Fe(III). TMT only forms complexes with some ions. Knowing what is in the water is important. The complexes are strong and do not break apart.
When the complexes settle, operators take them out of the water. They use filters or let the solids sink to remove them. The water is tested to check if metals are gone. If some metals are still there, other methods may be needed. TMT does not work as well for very low metal levels. The solid complexes are collected and thrown away safely. This stops harm to the environment. Dalian Sinobio Chemistry Co.,Ltd.gives chemicals to help with this process. Safety and care for the environment are always important during removal and disposal.
Tip: Always check the system for changes in metal levels and reactor condition to keep removal safe and effective.
Trimercaptotriazine sodium salt works very well for taking out heavy metals from factory water. Operators see that even a little TMT-15 can remove many kinds of metal ions. This includes copper, lead, nickel, and tin. The process makes strong complexes that do not break apart. These complexes trap the metal ions and keep them out of the water. TMT-15 does not smell and is less harmful than many old chemicals. It works in both acidic and basic water. The complexes settle fast, so it is easy to separate solids from liquids. This also makes sludge drying simple. Many factories like TMT-15 because it can remove metals that are already in complexes. Other chemicals often cannot do this.
Operators like that TMT-15 makes safe, stable complexes. This lowers risks when handling and throwing them away.
Factories using trimercaptotriazine sodium salt can meet tough environmental rules. The European Commission says TMT is one of the best ways to remove heavy metals, especially mercury. This helps companies follow EU and REACH safety laws. The complexes made by TMT-15 and TMT-55 do not let metals leak out, even in harsh conditions. This keeps the environment safe from toxic metals. The process does not make dangerous leftovers, unlike some old ways. Dalian Sinobio Chemistry Co.,Ltd. sells water treatment and biocide chemicals that help factories work in a green way. Using TMT-15 helps factories lower their impact on the environment and follow world rules.
Trimercaptotriazine sodium salt helps factories and plants save money. TMT-15 works so well that operators use less product for good results. The strong complexes mean fewer extra steps are needed. Fast settling saves time and cuts down on work costs. The process also makes sludge easier to handle, so disposal costs go down. TMT-15 is less harmful, so safety training and gear cost less. Dalian Sinobio Chemistry Co.,Ltd. gives good products that help companies save money and meet green goals. Picking TMT-15 or TMT-55 for heavy metal removal helps factories work better and save more in the long run.
Trithiocyanurate is different from other heavy metal precipitants. Many factories pick trithiocyanurate because it makes strong bonds with metals like palladium, nickel, and copper. These bonds help take out toxic metals from wastewater. Trithiocyanurate complexes are very stable, so metals stay trapped and do not escape. Other precipitants, such as sulfides or hydroxides, make weaker bonds. Trithiocyanurate has a special ligand structure that holds metals tightly. This helps clean water and lets people recover metals.
Operators see that trithiocyanurate works at many pH levels. Making trithiocyanurate complexes is simple, and checking them is easy. Many industries like trithiocyanurate because it does not smell bad and is safer to use. The table below shows how trithiocyanurate compares to other common precipitants:
Precipitant | Complex Stability | Odor | Metal Selectivity | Safety |
|---|---|---|---|---|
Trithiocyanurate | High | None | High | High |
Sulfide | Medium | Strong | Medium | Medium |
Hydroxide | Low | None | Low | High |
Tip: Trithiocyanurate complexes are safer and work better for removing heavy metals in water treatment.
Trithiocyanurate is used in many types of factories. Electronics, mining, and drug plants use it to treat wastewater. In drug factories, trithiocyanurate takes out palladium after making medicine. Metal smelters use trithiocyanurate complexes to get back valuable metals. Making and checking these complexes helps keep quality and safety high.
Trithiocyanurate is also useful outside of metal removal. Scientists study trithiocyanuric compound for fighting tumors and germs. This makes trithiocyanurate important in both industry and science. Dalian Sinobio Chemistry Co.,Ltd. sells trithiocyanurate, water treatment chemicals, and biocide chemicals for these jobs. Complexes with trithiocyanuric acid help clean water and recover metals, so trithiocyanurate is a good choice for many uses.
Operators can count on trithiocyanurate to work well for removing heavy metals and in other factory jobs.
Trimercaptotriazine sodium salt helps take out heavy metals easily. Many factories use this to follow tough environmental rules.
Companies like it more than old ways because it works quickly and keeps water clean.
Dalian Sinobio Chemistry Co.,Ltd. sells good water treatment and biocide chemicals.
To learn more or find better ways to remove heavy metals, check out Sinobio’s product page and ask their experts for help.
Trimercaptotriazine sodium salt is best for mercury, copper, lead, and cadmium. It makes strong bonds with these metals. Many factories use it to clean water and take out heavy metals.
Yes. This compound makes stable complexes that stop metals from leaking into water. It helps remove heavy metals in a green way and meets tough rules.
Operators often mix trimercaptotriazine sodium salt with other water or biocide chemicals. This helps remove more metals and meet water safety rules for factories.
Dalian Sinobio Chemistry Co.,Ltd. sells trimercaptotriazine sodium salt, biocide chemicals, and water treatment chemicals. Companies can visit Sinobio’s product page to learn more and see choices.
Yes. Many places like mines, electronics factories, and power plants use trimercaptotriazine sodium salt. It works well for many types of water cleaning jobs.
