Email : zhou@sinobiochemistry.com Phone : +86-13941198570
 |
| Quantity: | |
|---|---|
Bronopol 99%
SINOBIO
2905590090
CAS: 52-51-7
EINECS: 200-143-0
UN Number: 3241 / 4.1 class
Molecular weight:199.99
Structural Formula:
Bronopol is effective against a broad array of organisms as determined by agar dilution. The minimum inhibitory concentrations (MIC) listed below illustrate its effectiveness. These data are intended only as an indication of the broad spectrum of activity of Bronopol and should not be interpreted as having relevance to the effectiveness or dosage against specific microorganisms in formulated products.
Bronopol is widely used in papermaking, pulp, coating, plastic, timber-cooling circulating water and other industries. Also, it can be used to prevent daily cometics from modly and corrosion.Medical disinfectant, cosmetic preservative, and pesticide bactericide. It has the advantages of good water solubility, good compatibility, high efficiency and low cost.
Bronopol may be used in the following end-use applications.
Pulp and Paper
BRONOPOL may be used for the control of slime- forming bacteria in paper mill process water and bulk pulp. It can be added into the hydropulper, machine chest or stock check. The correct dose of active ingredient for these applications is 10-250 ppm BRONOPOL in paper mill process water and 50-250 ppm BRONOPOL in bulk pulp.
Water Treatment
BRONOPOL may be used to control slime-forming bacteria in recirculating water cooling towers, evaporative condensers, industrial process water, and air scrubber, air conditioner and humidifier systems. BRONOPOL may be dosed directly into the sump or basin at any point where there is adequate agitation to ensure dissolution. The correct dose range of active ingredient is 25-100 ppm BRONOPOL.
Oil Production
BRONOPOL may be used to control aerobic and anaerobic bacteria, especially sulfate-reducing bacteria, in oil and gas-related production Bronpol may be dosed at any convenient point in the process. The dose rate for oil flooding/injection waters, enhanced oil recovery fluids, produced water, drilling fluids, fracturing fluids and workover and completion fluids is 50-100 ppm BRONOPOL. The dose rate of active ingredient for well squeeze fluids and fracturing fluids is 25-200 ppm.
Oil and Gas Transportation and Storage
BRONOPOL may be used to control aerobic and anaerobic bacteria that contribute to corrosion in pipeline maintenance and water bottoms in oil or transportation tanks. The dose range for water bottom in oil or transportation tanks is 50-100 ppm in the aqueous phase. For pipeline maintenance the dose range is 25-200 ppm
Bronopol is used as a microbiocide/microbiostat in oil field systems, air washer systems, air conditioning/humidifying systems, cooling water systems, papermills, absorbent clays, metal working fluids, printing inks, paints, adhesives and consumer/institutional products.
Bronopol powder : 25 kg drum, 16 MT / 20 GP with pallet, 18 MT / 20 GP without pallet;
500 kg / JUMBO bag, 20 MT / 20 GP with pallet; customers' requirement.
Storage for one year in shady room and dry place.
CAS: 52-51-7
EINECS: 200-143-0
UN Number: 3241 / 4.1 class
Molecular weight:199.99
Structural Formula:
Bronopol is effective against a broad array of organisms as determined by agar dilution. The minimum inhibitory concentrations (MIC) listed below illustrate its effectiveness. These data are intended only as an indication of the broad spectrum of activity of Bronopol and should not be interpreted as having relevance to the effectiveness or dosage against specific microorganisms in formulated products.
Bronopol is widely used in papermaking, pulp, coating, plastic, timber-cooling circulating water and other industries. Also, it can be used to prevent daily cometics from modly and corrosion.Medical disinfectant, cosmetic preservative, and pesticide bactericide. It has the advantages of good water solubility, good compatibility, high efficiency and low cost.
Bronopol may be used in the following end-use applications.
Pulp and Paper
BRONOPOL may be used for the control of slime- forming bacteria in paper mill process water and bulk pulp. It can be added into the hydropulper, machine chest or stock check. The correct dose of active ingredient for these applications is 10-250 ppm BRONOPOL in paper mill process water and 50-250 ppm BRONOPOL in bulk pulp.
Water Treatment
BRONOPOL may be used to control slime-forming bacteria in recirculating water cooling towers, evaporative condensers, industrial process water, and air scrubber, air conditioner and humidifier systems. BRONOPOL may be dosed directly into the sump or basin at any point where there is adequate agitation to ensure dissolution. The correct dose range of active ingredient is 25-100 ppm BRONOPOL.
Oil Production
BRONOPOL may be used to control aerobic and anaerobic bacteria, especially sulfate-reducing bacteria, in oil and gas-related production Bronpol may be dosed at any convenient point in the process. The dose rate for oil flooding/injection waters, enhanced oil recovery fluids, produced water, drilling fluids, fracturing fluids and workover and completion fluids is 50-100 ppm BRONOPOL. The dose rate of active ingredient for well squeeze fluids and fracturing fluids is 25-200 ppm.
Oil and Gas Transportation and Storage
BRONOPOL may be used to control aerobic and anaerobic bacteria that contribute to corrosion in pipeline maintenance and water bottoms in oil or transportation tanks. The dose range for water bottom in oil or transportation tanks is 50-100 ppm in the aqueous phase. For pipeline maintenance the dose range is 25-200 ppm
Bronopol is used as a microbiocide/microbiostat in oil field systems, air washer systems, air conditioning/humidifying systems, cooling water systems, papermills, absorbent clays, metal working fluids, printing inks, paints, adhesives and consumer/institutional products.
Bronopol powder : 25 kg drum, 16 MT / 20 GP with pallet, 18 MT / 20 GP without pallet;
500 kg / JUMBO bag, 20 MT / 20 GP with pallet; customers' requirement.
Storage for one year in shady room and dry place.
